Factor 4 Motorbike By Henry Wang

If you thought super bikes – like the ones shown in the movie TRON – were only possible in sci-fi movies, then you can feast your eyes on this ultra-cool big daddy of all motorbikes you may have seen till date. Conceptualized and designed by Henry Wang, this super bike called Factor 4 has just one aim, and that is to blur any and all kinds of distinctions between sports bikes and dirt bikes.


To achieve this near impossible task, Wang has provided his bike a triangular frame; also the structural core of his bike. In fact, the strength and aesthetic of this angular form can be seen in all aspects of the bike from its nose to tail, and even in the wheel spokes, rectilinear exhaust and the gauge clusters. Apart from this, Wang has taken special care to enhance the performance, efficiency, safety and adaptivity of the bike. It is the overall enhancement of these vital four vital features of the bike which has lead Wang to name the bike Factor 4.

In terms of performance, Factor 4’s turbocharger draws the most out of its four stroke, 16-valve inline four, to push all the recorded limits of performance. Due to this triangular form, the bike has useful wing like structure that only aids its superior performance. For example, the back wings of the bike are lit and act as turn signals all the time — even under low natural light to ensure that the rider is fully visible to other vehicles on the road. Further, when the wings close, they ensure that drag is kept absolutely minimal. This allows the sleek, streamlined bike to cut through air and heavy traffic more efficiently. These closed wings also help keep the rider safe, and yet provide able room to navigate this machine.

These wings enhance efficiency of the bike to the utmost. The moment you take this bike above 80 km/h, it’s intelligent braking system will immediately deploy these wings, which then act as an air brake that gradually and safely slow down the bike. Due to this unique feature, a rider need not sit upright to brake anymore. Also while taking sharp turns at high speeds, the wings again engage automatically to counteract the forward momentum, and hence provide a kind of a gentle pull to swing the bike across hairpin bends.

As far as adaptivity goes, the bike boasts of a significantly wide wheel base that provides the bike with a lot of grip on both, streets as well as rough terrains. Adaptive suspension is another important feature that allows Factor 4 to ride in any kind of terrain, as the swingarm’s range of motion can handle both the stiffness and softness setups needed to run on any kind of surface.

Lastly, for rider safety, Wang has ensured that the chain and rear sprocket are completely enclosed in the swingarm. This also prevents bike safety as it does not let any debris damage the drivetrain. Plus, all the moving and mechanical parts of the bike are enclosed in lightweight carbon fiber panels that prevent any damage to them and are consistent with the overall aerodynamic design.
Designer: Henry Wang
Source: DesignBUZZ.com

Hoverbike By Chris Malloy

If you are a motorcycle freak, then you surely want to be aware of the latest update on the new and upcoming bike models. A new bike called the Hoverbike is all set to be given a try. This hoverbike has been invented and designed by Chris Malloy, and it is meant only for all those audacious bikers in the world.


The bike comes with an 1170 cc 4-stroke engine which provides 80 kW compelling two ducted propellers. The bike is supposed to touch a height of at least 10,000 feet due to its high force to weight ratio and is expected to reach the estimated airspeed of 150 knots (278 km/hr or 173 mph). Sadly, this bike has not been tested out; hence the figures provided are just hypothetical.

The prototype Hoverbike has only a single seat and the pilot has to be on a Kevlar reinforced carbon fiber whose frame is made of foam core. This is placed in the mid point of two spinning propellers which spin horizontally and are built from Tasmanian Oak edged with a carbon fiber trailing. Hover-bike is based on a simple system of propagation and principles. The presence of two horizontal blades at front and rear cancel out each other’s torque reaction and thus improves the overall balance and efficiency of system and eliminates the requirement of an external balancing device like anti-torque vertical tail rotor.

Perhaps the reason why this vehicle is called a bike is because of its control mechanism and steering system which is based on bike like handlebar grip. But unlike a typical bike, left hand grip controls the angle of vanes, and the right hand grip controls the thrust. Left hand control is a bit complex here since the movement is meant to be in 3 dimensions unlike the two dimensional movements that are seen in the case of bikes.

It has the dimensions of 3 m length by 1.3 m width by 0.55 m high (9.8 x 4.3 x 1.8 ft). The bike weighs 105 kg (231 lb) and has the utmost takeoff weight of 270 kg 595 lb). It has been claimed that the function of the bike’s 30 L primary fuel tank is to provide a range of 148 km (92 miles) at a cruising speed of 80 kts (148 km/h or 92 mph), whereas adding subordinate fuel tanks to the automobile will double the fuel capacity and the range.

Safety feature has always been a primary concern when discussing airborne vehicles. The hoverbike design consists of multiple components which fit snugly into the design without functional aspect. The prototype also doesn’t feature pitch propellers which bring on auto rotation mode in case of engine failure. Nevertheless, Malloy justifies the design by making the rider wear a parachute as a viable and safe option.





Designer: Chris Malloy
Source: AutoMotto.com

ENLACE Modular Bicycle By Lim Zheng Wei

Riding a bicycle is always a pleasant experience especially with a group of friends. But at times it becomes a little difficult to ride parallel to each other and there is always a fear of smashing into each other while talking. Also the same color of the bicycle can be quite a dull sight every single day. Changing all such notions is ENLACE designed by Lim Zheng Wei which will make sure that your trips on a bicycle are interesting enough.


The bicycle comes with an outer casing that can be changed when desired. If someday you want your bike to look red or blue, simply change the outer case and give it a fresh look. Coordinate it with your outfit or according your mood, the colors will always make your bike look smart. Exploiting the shaft technology is this modular bike which can be easily coupled with a second bicycle. For a great and secure tandum side-by-side manner the bicycles can be fixed together with three main joints: the front steering, the back joint which is sited at the back wheel of the inner frame and the front joint that is positioned at the front of the outer frame. With the tandum side-by-side mode, you can talk to your friends endlessly without the fear of colliding into each other.

ENLACE will make bicycle rides enjoyable and also make sure you don’t get bored with the same skin color of the bike.



Designer: Lim Zheng Wei
Source: Design BUZZ

Scupio Footbike By Bart Doors

The Scupio is a unique concept footbike designed by Bart Doors. The designers however refer to their creation as the foodbike. Since no information is provided to justify the name or the entire concept, we can only assume it to be a spelling error. From the images, this sleek bike appears to be one stylish creation. With ample space to rest your legs after the initial push, this footbike is just awesome. A great concept for every footbike enthusiast, it’s definitely amazing.


Designer: Bart Doors
Source:  DesignLaunches.com